If you are experiencing problems with your Plusnet broadband, there are some steps you can take to make sure you are getting a speed you can live with. First, you will need to run a speed check to determine where your speed problem is coming from. You can do this by using a program called the Plusnet Speed checker.
Table of Contents
The blue light on the router indicates there is no internet connection
You have been told that your Plusnet router will display a blue light if you are not connected to the internet. The light can appear for a variety of reasons, including technical errors. If this is the case, try to fix the problem until it is resolved.
First, you should check your router’s power leads. Make sure they are correctly plugged into the router’s back panel. If they are not, unplug them for a few minutes and reconnect.
Next, you need to check the light on the router. If you see a blue light, the hub is likely functioning well. The seat is not working correctly if the light is green or orange.
You may also need to restart your device. This can solve some of the most common network problems.
The WiFi network extender picks up the existing WiFi network signal
When you want to extend the range of your WiFi network, you can purchase an extension. It’s a device that can be plugged into your router and is responsible for receiving and rebroadcasting the wireless signal. These devices can help you get faster connections and better internet coverage.
A WiFi extender is often referred to as a repeater. It is an inexpensive option to improve the quality of your WiFi signal. However, it is not a replacement for a wireless router. If you need faster speeds, you should purchase a new wireless router.
When you are shopping for a WiFi booster, make sure you consider the other WiFi equipment in your home. Some of the most common are single-band and dual-band extenders.
A single-band extender will only transmit and receive 2.4GHz frequencies. You will need a dual-band extender if you need to improve your network on the 5GHz band.
Re-run Plusnet Speed checker
The Plusnet Speed checker is an excellent tool for troubleshooting your broadband connection. It measures your connection’s download and upload speed. You can run it on your PC, smartphone, or mobile device. The results will help you determine the cause of your broadband problem.
The first step is determining whether your internet provider is performing any maintenance around you. For example, if the internet is slow, your provider may attempt to repair a problem. Alternatively, it could be a network issue. Depending on your situation, you might need to contact your Internet service provider or try another provider.
You can also test the connection by using a bigger file. A larger file is selected based on your connection’s speed. If your broadband speed is slow, it’s time to reboot your modem or router.
Reset the router
If you are having trouble accessing your Plusnet broadband, you may need to reset your router. This process will remove all the settings you have added and reset your router to factory standards. This is a quick and easy way to get your broadband service working again.
First, make sure your router is powered up. Then, connect an Ethernet cable to the port on the router’s back. Next, you will need to log into the setup interface.
If you can log into the setup interface, you can enter a password to configure your router. You can contact Plusnet customer support to help you if you cannot. They can send a tech guy to your location to fix the problem.
If you still have trouble connecting, try a hard reset. This will reset your router to its defaults and restore any custom settings you have made. You will also be able to use the management interface again.
